Dealing with a Abrupt Hot Water System Breakdown: Steps to Take
Dealing with a Abrupt Hot Water System Breakdown: Steps to Take
Blog Article
Each person seems to have their own piece of advice when it comes to What Would Cause My Electric Water Heater to Stop Working?.
Lots of modern homes utilize an electrical water heater for their heating system, due to its ease and ease of use. However, just like any other electric home appliances, problems may emerge with its use, suddenly. It can be truly aggravating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't hot enough or even as well warm. Whatever the instance might be, water heater problems can be quite stressful. Thankfully, we've made a list of feasible remedies to your water heater concerns. There are a variety of elements that could create most of these troubles, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety. Whatever the trouble is, getting it taken care of should not position way too much of a concern if you follow these actions:
Check Your Power Supply:
As fundamental as this might seem, it is very essential. Without ample power, your hot water heater will not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the problem, just turn it on and off again. Change any kind of busted or worn-out fuse. Test the device with power after these changes to see if it's currently working.
Check the Burner in the Water Heater:
If it's not a power problem, then try taking a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the issue isn't with any one of them. If any of them is malfunctioning, change that part and after that check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to check the temperature settings on your top thermostat. Make sure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This must help heat up the water. Transform the circuit breaker back on as well as inspect if the issue has been dealt with.
Call A Specialist:
If after changing all malfunctioning parts and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for an expert opinion. The trouble with your heating system could be that the hot and cold taps have been changed or it might be undersized for the quantity of warm water needed in your house. Whatever the case might be, a professional plumber would aid resolve the issue.
Verdict
Hot water heater troubles are not always significant. Many of them are because of small issues like a blown fuse or damaged heating element. Changing the damaged parts must suffice. However, if you are still unable to fix the problem, give a call to your nearby plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our post on How to Troubleshoot and Repair an Electric Water Heater. Thanks so much for finding the time to browse our piece. Are you aware of another individual who is intrigued by the niche? Please feel free to promote it. Thanks for your time. Come back soon.
Get sorted, call! Report this page